The SMOK TFV8 Baby V2 Sub-Ohm Tank heralds the next generation of Mesh Coil Tanks, headlined by the Baby V2 Coil System paired with the extraordinary features and structural elements of SMOKTech designs. Measuring 25.4mm in base diameter with angular lines, the TFV8 Baby V2 takes the Sub-Ohm system by storm with a beautifully crafted chassis and a 16mm Baby V2 exclusive Delrin widebore drip tip. When installed with the convex glass measuring 30mm at the widest point, the TFV8 Baby V2 has a maximum eLiquid capacity of 5 milliliters accessed via the signature rotary hinged top-fill method with lock mechanism.The crowning achievement lies within the hyper engines of the TFV8 V2 Coil Family, including a 0.17ohm Baby V2 A1 Single Coil with a large piece of mesh covering the cotton and a rating range of 90W to 140W. Each full set-up also comes with the 0.2ohm Baby A2 Dual Coil with two heating cores and a wattage setting of 50W to 80W. Airflow enters the structure through three large airslots at the bottom base, fully adjustable for maximal throttle and cooling properties.
SMOK TFV8 Baby V2 Replacement Coils
SMOK TFV8 Baby V2 Sub-Ohm Tank Features:
- 25.4mm Base Diameter
- 30mm At Widest Point
- 5mL Maximum Juice Capacity – Convex Glass Extension
- Superior Stainless Steel Construction
- High-Grade Glass Reinforcement
- High-Temperature Resistant – Explosion Proof
- Convenient Top-Fill Rotary Design – Lock Button Mechanism
- Massive Triple Adjustable Airflow Control at Base
- Performance-Grade TFV8 Baby V2 Coil System
- 0.17ohm Baby V2 A1 Single Coil – rated for 90-140W
- 0.2ohm Baby V2 A2 Dual Coil – rated for 50-80W
- Antibacterial Medical Cotton
- 16mm Wide Delrin Widebore Drip Tip – Exclusive Fitment
- Gold-Plated 510 Connection
- Available in White, Stainless, Black, Blue Prism, Green, Red, Rainbow, Gold
- 1 TFV8 Baby 2 Tank
- 1 0.17ohm Baby V2 A1 Single Core
- 1 0.2ohm Baby V2 A2 Dual Core
- 1 Spare Glass Tube
- 1 Spare Parts
- Instructional Manual
Make sure to properly prime each coils before use.
Warning: These coils are for a Sub-Ohm resistance atomizer and only work on mechanical mod or devices that can handle Sub-Ohm resistance of 0.5ohm or lower. Please make sure you have a great understanding and technical knowledge on how to use mods and batteries that can handle Sub-Ohm coils. Do not use short or flat 510 connection on any hybrid or hybrid style device. If you are not familiar or unsure of particular products or set-ups, please do not use it. Always use proper precautions and handling.
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.
Due to the nature of this product, it is not covered by warranty and cannot be exchanged.”